How to cleaning printer head?
1. Put cleaning water into the vessel,water height is just soaked printer head as well.
Do not let cleaning water fluid nozzle contact with printhead's circuit board.
Put a piece of paper below printhead,let it do not contact to vessel.
2. Let printhead soak in the cleaning water continued for several hours or more,
in immersion, with the auxiliary use of the printer head cleaning,strengthening effect.
3. If the internal sponge cartridge needs cleaning, let cleaning water is heated to 60 °C,
poured into the sponge inside, so that cleaning fluid to melt the ink which has been caking off,
with the printer head cleaning uses, and then the cleaning water has been melted or use
the centrifuge to extract the ink drying.
Note:
1. If do not know ink performance your machine used,before cleaning must do ink test:
put your ink in to a small container,put cleaning water into it,see if completely dissolved rapidly,
if not,do not use that cleaning water,replacement of the correct type of cleaning fluid.
2. Users to remove the printhead,be sure to turn off the printer, it is best to bring the hands of anti-static ring,
if have not, let hand to touch other conductors,to release of the body's static electricity,
sometimes body's static electricity is sometimes the body is too high, Its easy to breakdown the motherboard components,
resulting in print, everything is normal, but there is no ink phenomenon.
3. When install printhead, make sure the it is dry, otherwise easily lead to burning printhead.
